In this application, plain bearings must function under extreme conditions. In addition to dust and dirt, there are also low temperatures. Furthermore, the installation space is limited and the components come into contact with water during the melting process.
With a specially manufactured plain bearing made of iglidur A180 a media-resistant and robust solution was found. The maintenance-free and lubrication-free operation makes it completely insensitive to dust and dirt. The abrasion-resistant properties also ensure a long service life. The plain bearing was manufactured from iglidur bar stock to perfectly match the application.
The "IceMole" is a melting probe, with which the polar regions, glaciers and as a long-term objective, extraterrestrial regions are to be explored. The probe essentially consists of a heating head with an ice screw and an aluminium housing, in which measuring instruments can be accommodated. The bearing of the ice screw must be insensitive to water and dirt, and should also be thermally insulating. Here, a component machined from an iglidur A180 bar stock has been used.
Due to the partial control system of the heaters on the melting head and on the walls of the IceMole, this can melt a path through the ice. Even cornering is possible. During melting, an ice core passes through the hollow ice screw into the interior of the probe, where it can be analysed. With the aid of the ice screw, the probe's melt head is pressed firmly onto the ice, ensuring optimum heat transfer between heating head and ice. In addition, the IceMole can make its way through "dirty" ice and sediment layers with the ice screw.
The ice screw is located in the middle of the melting head and rotates during the melting process. As a result, it generates tensile force that serves as propulsion for the IceMole.
A large moment is generated perpendicular to the axial direction during cornering. To support this, the ice screw bearing is located at the front of the melting head. The bearing should therefore be insensitive to water and dirt.
To effectively melt ice, the gap between the ice screw and the melt head must be small. This limits the installation space for the bearing.
It is important that the ice screw is thermally insulated from the melt head, so that the ice core inside the probe does not melt during the melting process.
Above all, the combination of small installation space and high thermal insulation requirements led the team to decide on a plastic plain bearing for the IceMole. Here, igus recommends the plain bearing iglidur A180 bar stock. The minimal moisture absorption makes the bearing very suitable for applications in the wet area and is extremely dirt-resistant. iglidur A180 plain bearings can also be used in a wide range of environmental conditions and in contact with numerous chemicals.
This prosthesis is an electrically powered finger. All axes involved in this movement are mounted through plastic bushings made of iglidur J. Altogether, eight bearings are integrated in one finger. The hand prosthesis must be able to cope in partially very harsh environments and remain fully functional in dirty or wet areas of application.
The bearings machined from iglidur J bar stock are corrosion-resistant and have a low wear rate.
At the so-called tyre "soaping" station of MCSS MC-Syncro Supply GmbH, among other things, the inner bead of the tyre is moistened with soap by means of brushes. As a result, the grease gets washed out over time from encapsulated metal bearings. The result was that the metal bearings jammed and the shaft continued to rotate. Since iglidur bar stock bearings have been in use, not only is the lubrication of the bearings dispensed with, but also costs associated with regular failure and replacement of bearings are also avoided.
De lunes a viernes de 7:00 a 20:00Sábados de 8:00 a 12:00