1 de 2
igus-icon-lupe
igus-three-dimensional-model
- Part number: JFI-0203-03
- Material: iglidur® J
- Forma: Casquillos con valona
- Dimensiones:
- d1 0.125 inch
- d2 0.1875 inch
- d3 0.312 inch
- b1 0.1875 inch
- b2 0.032 inch
- Ajustar dimensiones
- Método de fabricación: Moldeo por inyección
- Vida útil:
- El corredor de fondo versátil, altamente resistente al desgaste en (casi) todos los ejes con coeficientes de fricción muy bajos
- Desgaste bajo contra diferentes materiales de eje
- Coeficientes bajos de fricción en funcionamiento seco
- Amortiguador de vibraciones
iglidur® J | The versatile endurance runner
iglidur® J is characterised by the lowest coefficients of friction in dry operation and its very low stick-slip tendency. With a maximum recommended surface pressure of 35MPa, iglidur® J is not suitable for extreme loads.
Typical applications
- Vending machinery
- Printing industry
- Beverage industry
- Aviation
- Cleanroom
When to use it?
- For high speeds
- When highest wear resistance at low to medium pressures is required
- Low wear against different shafts
- When a low coefficient of friction in dry operation is requested
- For vibration dampening
- When good chemical resistance is required
- For best performance with soft shaft materials
- Low moisture absorption
When not to use it?
- When high pressure loads occur
- When temperatures of greater than +120°C occur in the short term
- When a cost-effective bearing for occasional movements is sought
¿Tiene dudas acerca de su idoneidad?
